Centro de Recursos Digitales
Abstract This paper proposes an analytical calculation method of frequency characteristics of DC input impedances of an IPM motor drive system for design and stability analysis by the impedance method. The proposed method is based on an averaged frequency model linearized at an operating point. The developed small-signal model considers control principles and mechanical perturbations. […]
Abstract In this study, the gas pressure dependence of optical and mechanical characteristics in reactive sputtered SiCO thin films for optical guided-wave pressure sensors was experimentally investigated. Thin films were fabricated by varying the gas pressure from 0.3 to 1.0 Pa at an oxygen flow ratio of 6%, and the gas pressure dependences was clarified. As […]
Abstract Advances in microfabrication technology have enabled electron beam lithography (EB lithography) systems to produce microfabrication on the order of 10 of nanometers. Using this technology, we have fabricated nanogap electrodes that can generate large electric fields at low voltages. The gap between the tips of the fabricated electrodes is 100 nm, and the curvature of […]
Abstract In this study, we proposed a cuff-less blood pressure measurement using a medical tape sensor with an embedded hetero-core optical fiber. The tape sensor pasted on the skin can directly detect pulse wave signals with a simple measuring device. Pulse transit time (PTT) was obtained from the time difference between the two pulse waveforms […]
With the rapid growth of multimedia data, cross-media hashing has become an important technology for fast cross-media retrieval. Because the manual annotations are difficult to obtain in real-world application, unsupervised cross-media hashing is studied to address the hashing learning without manual annotations. Existing unsupervised cross-media hashing methods generally focus on calculating the similarities through the […]
With the demand for Internet connectivity in remote areas, the space-air-ground integrated network (SAGIN) was proposed to achieve ubiquitous coverage and enhance service capabilities of extant terrestrial networks. The paradigm of virtual network element placement (NEP) is applied into SAGIN. It can save energy and operating costs by placing specific network elements (NEs) as software […]
The demand for a high transmission data rate in 5G leads to the wide application of the multi-input, multi-output (MIMO) technique. However, the narrow design space in mobile phone causes severe unexpected coupling between antenna units and deteriorate the system performance dramatically. In this paper, we focus on the antenna coupling within the MIMO system. […]
Visible light communication (VLC) has emerged as a promising communication method in 6G, particularly in the domain of underwater communication. However, because of its intimate coupling to the light-emitting diodes (LED), the transmission rate is limited by the modulation bandwidth and the nonlinearity of the LED. With current device development, LED bandwidth is substantially lower […]
Deep forest is a tree-based deep model made up of non-differentiable modules that are trained without backpropagation. Despite the fact that deep forests have achieved considerable success in a variety of tasks, feature concatenation, as the ingredient for forest representation learning, still lacks theoretical understanding. In this paper, we aim to understand the influence of […]
Resonance is a common physical phenomenon in real world, and the modal analysis is a useful tool. Within the regime of electromagnetics, characteristic mode theory is established in frequency domain (FD), and it is doubtful that whether we can find similar modes in time domain (TD). In this paper, resonating modes of a vibrating string […]